Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ACME threads in holewizard?
- Thread starter mckeand13
- Start date
If they are not listed in a standard then make your own Derived DB, but I'm not sure if how different ACME threads are to the other threads in SW.
- THis was made for SW04 - but hte operations are nearly the same.
Regards,
Scott Baugh, CSWP![[pc2]](/data/assets/smilies/pc2.gif "[pc2] [pc2]")
3DVision Technologies
faq731-376
- THis was made for SW04 - but hte operations are nearly the same.
Regards,
Scott Baugh, CSWP
3DVision Technologies
faq731-376
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question