Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ADAMS\Car : Modify the _MDI_SDI_Testrig

Status
Not open for further replies.

Daniel Ursache

Mechanical
Apr 7, 2017
8
Hello gentlemen,

Adams Car 2014 :
Since a couple of days I struggle to find out how to modify the _MDI_SDI_Testrig file, I mean to add or remove communicators (cis / cos / cil[r] / col[r] ) or parameters variable (pvs / pvl[r]).

For exemple I splitted the template _brake_system_4Wdisk.tpl in two : _front_brake_system.tpl and _rear_brake_system.tpl and also I created two new subsystem files. But when I try to open the entire assembly I receive the errors from the picture below.
I think in order to avoid these errors I need to update the testrig file, but where can I find it ?

Please help me with some hints. Thank you for you time.

71f48353-9b18-4fbd-ba50-81f489eaf5d0-large_wmi4o1.jpg
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor