Adams car-Subsystem Modification

[Yousif Alaraji]

Dear Engineers,

Kindly I did some modifications on the front suspension I opened it on Template and then save it as a subsystem in the Standard model then when I tried to assemble it, It shows an error when I am trying to analyze it. Although the dampers.tbl/msc_0001.dpr exist, it shows that it was not found.

The error is accordingly:
Reading in property files...
ERROR: The property file referenced by the following element was not found:
ERROR: - fsae_frontsusp_changed.dal_ride_damper : mdids://fsae_2018/dampers.tbl/msc_0001.dpr
ERROR: The property file referenced by the following element was not found:
ERROR: - fsae_frontsusp_changed.dar_ride_damper : mdids://fsae_2018/dampers.tbl/msc_0001.dpr
Reading of property files failed.

How can I solve this issue?

Best Regards,
Yousif

 

[GregLocock]

Please do the tutorials. Also if this is for fsae, why are you using ADAMS?

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?