Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ADAPTIVE Meshing

Status
Not open for further replies.
Cansand

Cansand

Structural
Jan 14, 2007
102
I am using NLGEO and some elements seem to be distorted (Jackobian=0 or negative)due to exccessive deformation . Do you recommend me to use adaptive meshing
 
Status
Not open for further replies.

Similar threads

mj345
  • Locked
  • Question
Hybrid Meshing in ABAQUS
Replies
1
Views
408
FEA way
FEA way
Taylor W
  • Locked
  • Question
Trouble meshing part
Replies
3
Views
79
FEA way
FEA way
aurum
  • Locked
  • Question
Adaptive Meshing and XFEM in Different Parts - Error
Replies
5
Views
125
FEA way
FEA way
psustudent
  • Locked
  • Question
Meshing around a 10 micron wide crack
Replies
4
Views
80
FEA way
FEA way
GovindRb
  • Locked
  • Question
ABAQUS EXAMPLE PROBLEM "TREAD WEAR SIMULATION USING ADAPTIVE MESHING IN ABAQUS/ STANDARD" 2
Replies
6
Views
81
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom