Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adjust the range

Status
Not open for further replies.
Catia8543

Catia8543

Mechanical
Jul 12, 2005
13
Using V5r13, range is currently set at 1 x 10 to the fifth. I need a setting of 1 x 10 to the sixth. I have a part w/ a r100,000 but I need to increase this to a radius of 1 million.

Many thanks!
 
Status
Not open for further replies.

Similar threads

c800
  • Locked
  • Question
Need the code to get access to the properties and isolate the parts and save it 1
Replies
3
Views
105
Little Cthulhu
Little Cthulhu
Mirme.lee
  • Locked
  • Question
How to activate the sheet to which the selected view belongs?
Replies
3
Views
102
Mirme.lee
Mirme.lee
zhonyang
  • Question
Return the nearnest surface and edge from body against point 1
Replies
2
Views
1K
zhonyang
zhonyang
Hix066
  • Locked
  • Question
Modify the default CATPart / CATProduct?
Replies
1
Views
68
Little Cthulhu
Little Cthulhu
CarlosR2022
  • Locked
  • Question
3Dx SectionService Runtime-Error '430' when set the object
Replies
0
Views
101
CarlosR2022
CarlosR2022

Part and Inventory Search

Sponsor

Back
Top Bottom