Excuses by my English poor man. it interests to me to learn the program Ideas, I thank for the aid of you in knowledge who mean the following abbreviations: (SDRC), and M1, M2, M3…, also I need to know like forming ideas v11 to work in Spanish. I also need you aid in manual and tutorial of this program. thanks
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Aid with Ideas NX
- Thread starter asfede
- Start date
hi,
the best way is to contact UGS (Siemens), they can provide you a test version of ideas. The latest version is NX ideas 5, where also the complete documantation is provided. Documentation includes many tutorials, so you can learn the basics of ideas on your own...
buena suerte,
arti
the best way is to contact UGS (Siemens), they can provide you a test version of ideas. The latest version is NX ideas 5, where also the complete documantation is provided. Documentation includes many tutorials, so you can learn the basics of ideas on your own...
buena suerte,
arti
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question