Air pressure error 1

[Jim 71]

Hi ,
I have Bystar 3015 4kw laser. I have an air pressure message coming up on the HV unit .I have good air supply ,no leaks that I can find .I have checked the pressure on regulators on air supply unit and the regulators on the Resonator it is 6 bar.Any ideas?

 

[krugtech]

there's a pressure switch on top of the aluminum valve block in the bottom of the resonator. if you have an air conditioner on your resonator it would be behind that door. They go bad once in a while. Swap it out with anything that closes over 5 bar


Chris Krug

http://krugtech.com/

Maximum Up-time, Minimum BS