aircraft passenger cabin stub beam

[Green 123]

existing repair on stub beams beneath the floor of aircraft passenger cabin is characterized as following:

"The existing repair must have removed the radius detail of the lower
inboard corner of the stub beam web"

Do you have any idea on what "radius detail" means?

 

[SWComposites]

Radius detail typically means the curved (radius) section between a web and flange.

 

[Green 123]

Radius detail typically means the curved (radius) section between a web and flange.

how is the curved section removed for repair?

 

[rb1957]

did the repair remove the lower flange of the spar ? (and replace it with a repair flange)

 

[SWComposites]

Green - where did you get this statement: "The existing repair must have removed the radius detail of the lower inboard corner of the stub beam web"?

The picture above looks like it comes from an SRM. What is the "existing repair" that you are referring to?

What are you trying to do? revise an existing repair? make an additional repair? seems like we need a lot more details.