Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
AISI 4150 w/ 1200 degree temper for BHN 321/341 Fatigue/Endurance/SN Curve, 10" nominal diamete
- Thread starter FOM1
- Start date
EdStainless
Materials
Have you tried the ASM Handbook?
You may have to live with data for 4140 (or 4145).
Timken used to publish this data but I can't locate it off hand.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
You may have to live with data for 4140 (or 4145).
Timken used to publish this data but I can't locate it off hand.
= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question