janarthananGre
Automotive
- Nov 28, 2024
- 2
We are doing a project for the alignment checking and repairing of a three wheeler chassis. We need to design it and develop it. While developing conceptual designs we had objectives like, Our design should have a sub part of measuring the mis alignments, Our design should have to lift our vehicle by holding rigidly the three wheeler and lift it, But the Three points can be differed due to the accidents, Our design should be have components for repairing the chassis by adding movable mounts so that the tinkers can work on that. And for the front fork of the chassis the alignment should be workable and repairable. Any Suggestion for the conceptual designs.
Last edited:
