I have an application in the food industry (flour, powdered ingredients, etc...) that will probably use an AB HPK series motor, but this environment is very dusty. My concern is the blower attached to the motor. I'm wondering if the blower will allow dust to enter the motor housing. If anyone has worked with these motors, I'd appreciate some guidance. Thanks.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Allen-Bradley HPK series motors
- Thread starter kchap
- Start date
Similar threads
- Question
- Question
- Locked
- Question