Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Alloy 20 Velocity Corrosion in Sulfuric Acid

Status
Not open for further replies.

danhuang7

Civil/Environmental
Jun 6, 2007
2
US
Hi Everyone,
I am doing a reserch on Alloy20 for Sulfuric Acid 90%-100% at ambient temperature. I could not find much information on the velocity corrosion rate for Alloy 20. I was wondering where can I get some data on that? Also, how does alloy 20 resist to corrosion? Is there a nickle film at the pipe interior? Is it vulnerable to disturbance? Thank you.
 
Replies continue below

Recommended for you

A SS will not be very sensitive to velocity since they rely on a chromium oxide passive film. Steels, cast iron, and lead have soft surface films of corrosion product that are soft and may wash off.


= = = = = = = = = = = = = = = = = = = =
Plymouth Tube
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top