Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Alnico 5 sintered recoil permeability 1

Status
Not open for further replies.
Indicator1

Indicator1

Structural
Aug 10, 2009
30
To all:

When working above the "knee", what value of recoil permeability do I use: 2.5, please?
Thank you.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
For sintered Alnico 5 above the knee, I recommend using recoil permeability of 5.

The 2.5 value is more appropriate for sintered Alnico 8
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Yuma
  • Locked
  • Question
B-H curve of 26 NiCrMoV 14 5 material
Replies
3
Views
121
MagBen
MagBen
Cristovao
  • Locked
  • Helpful tip
15-5PH B-H curves
Replies
0
Views
93
Cristovao
Cristovao
Rachel_CleanEnergy1
  • Locked
  • Question
Magnetic Permeability: 1008 vs 1018
Replies
18
Views
1K
hacksaw
hacksaw
TJMAT
  • Locked
  • Question
Nitronic 50 Permeability / Anneal
Replies
3
Views
89
hacksaw
hacksaw
Scott574
  • Locked
  • Question
Short solenoid/electromagnet cores - permeability, annealing, sources
Replies
5
Views
124
dgallup
dgallup

Part and Inventory Search

Sponsor

Back
Top Bottom