Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Aluminium AL6086-T6 hardness
- Thread starter SAParker
- Start date
Nominal values for mech properties are for information only. They are not to be used for design or acceptance/rejectance of material. Consequently, you must have a spec with a hardness range, such as an AMS, if you will be accepting material based on hardness.
- Status
Similar threads
- Locked
- Question
- Locked
- Question