Amada FO-3015NT Remove AMS connection 1

[LaserDIY]

I'm working on installing a used Amada FO-3015NT laser we bought. It originally came with the AMS301510T automation system. This appears to be connected to the LST PLC with a serial connection. Anyone know how to turn off the communication and get it operating standalone?

I checked the schematics figuring it might be one of the "Option" jumpers. I only have jumper 00003 ("Space chg") installed and pulling this didn't seem to help. Any tips where to look?

 

[LASERNINJA]

Some machines I have installed in that situation require no changes to jumpers or anything. Some require the signal wires for the sheet/pallet lifter to be unplugged.

Best bet is to try it,and see what alarms you get.

 

[LaserDIY]

Thanks!

I wasn't expecting doing nothing to fix this but it did. I just disconnected the serial wires and the LST works fine. Well, it will after I fix the other pneumatic sensors on the pallet lock.