Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Amortisseur Windings

Status
Not open for further replies.

wbd

Electrical
May 17, 2001
658
Hello,
How can you tell by looking at a generator if there are amortisseur windings? These are open, small hydro powered generators.

Thanks in advance
wbd
 
Replies continue below

Recommended for you

The amortisseur windings of a synchronous AC generator are the conductors embedded in the pole faces of the rotor. They are connected together at both ends of the poles by end rings or end plates. Their function is to dampen waveform distortion during load changes.

See item I page 3-5 on the enclosed site:
 
Suggestion: Typically, all salient type of synchronous machines have the amortisseur to be able to start them.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor