AMS 5629 specs for PH13-8M0 material

[eclipse087]

hi eveyone,
this is my first post in the forum.
i am searching for AMS5629 spec.i searched everywhere on the internet and couln't find it.Can someone help me?

 

[KirbyWan]

AMS specs cost about $30 to $80 (US) each. Your best bet on the cheap is to find a MIL spec for that material, though I don't know what the crossreference is. Do you just need to know the composition? That information is usually available with a simple web search.

-Kirby

Kirby Wilkerson

Remember, first define the problem, then solve it.

 

[TVP]

SAE AMS5629 can be purchased directly from SAE for $63.00. Here is a link to their website:

http://standards.sae.org/ams5629e

If you just want to know a little about the material, its composition, etc., then look at the manufacturers that produce this grade, such as Cartech, Corus, or Latrobe:

http://cartech.ides.com/datasheet.aspx?E=51&FMT=PRINT

http://www.corusgroup.com/file_source/StaticFiles/Business Units/Engineering steels/13_8ph.pdf

http://www.latrobesteel.com/assets/documents/datasheets/13-8_Mo.pdf

 

[eclipse087]

thanks a lot guys

 

[RPstress]

Also this is a MIL-HDBK-5/MMPDS material, so most of what's needed for design (and, to a degree, manufacture) is in there.