Jan 29, 2011 #1 TVP45 Mechanical Jul 26, 2006 8 Is there anything for Inventor roughly equivalent to Matt Lombard's SolidWorks Bible?
Jan 30, 2011 #2 EngAddict Mechanical Oct 1, 2009 410 Nothing quite that size but you might want to try these: http://www.amazon.com/Mastering-Aut...=sr_1_1?ie=UTF8&s=books&qid=1296449214&sr=8-1 I have only read the 2010 version of the above but is should be similar. Also my recommended over the one below. http://www.amazon.com/Learning-Autodesk-Inventor-Official-Training/dp/1897177658/ref=pd_rhf_shvl_1 There are also numerous tutorials and white papers around for free if you do a search. Upvote 0 Downvote
Nothing quite that size but you might want to try these: http://www.amazon.com/Mastering-Aut...=sr_1_1?ie=UTF8&s=books&qid=1296449214&sr=8-1 I have only read the 2010 version of the above but is should be similar. Also my recommended over the one below. http://www.amazon.com/Learning-Autodesk-Inventor-Official-Training/dp/1897177658/ref=pd_rhf_shvl_1 There are also numerous tutorials and white papers around for free if you do a search.
Jan 31, 2011 Thread starter #3 TVP45 Mechanical Jul 26, 2006 8 Thank you. I'll follow up. Upvote 0 Downvote
