Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Anchor Rod for Grillage foundation

Thread starter MrugeshPatel
Start date Mar 17, 2005

Status: Not open for further replies.

Mar 17, 2005

MrugeshPatel

Structural

I had designed the Grillage foundation to support the guy of the overhead transmission line pole. The ultimate uplift in the guy is 100 kips. Depth of grillage is around 9 & 10 feet from ground & inclination of the grillage is 45°. Now I need an Anchor rod with the eye at both the end. So I can connect U bolt at the grillage level to Anchor rod through eye. Eye at the other end of the rod will be used to for guying the 2-5/8" stranded guy wires. I need the rod with 14' & 17' length for differen soil condition. I need this assembly using standard catalog Items not the custom made. I had tried with Hubbles/Chance but I do not have satisfactory solution.
Can any one suggest some thing?