Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Angular displacement sensor

Status
Not open for further replies.

bacheandrew

Bioengineer
May 31, 2003
1
Where would I attain an angular displacement sensor, which functions on a 'spirit level' principle. Dimensions required approximately 3cm*3cm*3cm. Angular range 45+. Sensitivity approximately 1 degree.
 
Replies continue below

Recommended for you

Do a websearch on "tilt sensor". Lots of stuff there.

TTFN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor