Angular Guy Wire Placement 1

[TBell47]

Hello,

Can anyone tell me if there is a code that governs angular displacement of guy wires in industrial applications?
I seem to recall reading somewhere that 30 degrees is a *minimum* from the vertical at the upper connectors. (*minimum* 60 degrees at the base anchor point).
If this be the case, is there a code that governs these minimums?

Thanks in advance for any assistance.
Thomas

 

[SlideRuleEra]

According to this article in Structure Magazine

http://www.structuremag.org/archives/2004/november/DesignWithCables.pdf

designing with cables is regulated by ASCE 19

http://www.SlideRuleEra.net