Jan 12, 2007 #1 brazeit Aerospace Jan 12, 2007 1 I need an anneal heat treat cycle for AISI 1215 and what magnetic properties will this give me?
Jan 12, 2007 #2 MagMike Materials Jun 4, 2003 504 I recommend annealing in vacuum or dry hydrogen atmosphere at 1650degF for 1 hour minimum (add more time if your material is thick). This will optimize the magnetic properties for the material. I can't give you the exact properties because that will vary from batch to batch. For more assistance, a description of your application will help. Upvote 0 Downvote
I recommend annealing in vacuum or dry hydrogen atmosphere at 1650degF for 1 hour minimum (add more time if your material is thick). This will optimize the magnetic properties for the material. I can't give you the exact properties because that will vary from batch to batch. For more assistance, a description of your application will help.
