Oct 13, 2004 #1 pdwispe Mechanical Jun 3, 2004 33 How do you add this kind of annotation on your drawing? >PE-HD< Thanks for your help.
Oct 13, 2004 2 #2 cowski Mechanical Apr 23, 2000 8,170 Change your note to this: $>PE-HD$< The <> symbols are normally control characters, if you want to use them in a note you have to precede them with a dollar sign ($). Upvote 0 Downvote
Change your note to this: $>PE-HD$< The <> symbols are normally control characters, if you want to use them in a note you have to precede them with a dollar sign ($).
Oct 13, 2004 #3 Xwheelguy Automotive Mar 17, 2004 2,048 Been too long since I've been on a UNIX box... Thanks, cowski. I'd forgotten about the $ sign. Should the original poster not give you a star within a couple of days, I'll give you one. Tim Flater Senior Designer Enkei America, Inc. http://www.enkei.com Upvote 0 Downvote
Been too long since I've been on a UNIX box... Thanks, cowski. I'd forgotten about the $ sign. Should the original poster not give you a star within a couple of days, I'll give you one. Tim Flater Senior Designer Enkei America, Inc. http://www.enkei.com
Oct 13, 2004 Thread starter #4 pdwispe Mechanical Jun 3, 2004 33 This is even worth a double star !! Many thanks for this tip. Upvote 0 Downvote
Oct 14, 2004 #6 Azrael Automotive May 12, 2003 685 Very good tip cowski, a star from me noted that only < needs to be preceded with a $ sign >PE-HD$< works as well Upvote 0 Downvote
Very good tip cowski, a star from me noted that only < needs to be preceded with a $ sign >PE-HD$< works as well
