latchescmk
Mechanical
Is there any way to have a leader from both sides of a note.
And why are leaders limited to 7.
NX3
Thanks
And why are leaders limited to 7.
NX3
Thanks
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Anotation Leaders
- Thread starter latchescmk
- Start date
- Status
Not the way you want to. I'd just lay 2 annotations with leaders at opposite ends on top of one another. I asked for UGS to add the same thing about a month ago. I wouldn't hold my breath that UGS adds it anytime soon.
I couldn't tell you why leaders are limited to 7 though. Off the top of my head, it's probably due to a drafting standard.
Tim Flater
Senior Designer
Enkei America, Inc.
Some people are like slinkies....they don't really have a purpose, but they still bring a smile to your face when you push them down the stairs.
I couldn't tell you why leaders are limited to 7 though. Off the top of my head, it's probably due to a drafting standard.
Tim Flater
Senior Designer
Enkei America, Inc.
Some people are like slinkies....they don't really have a purpose, but they still bring a smile to your face when you push them down the stairs.
Yes,
And I don't care what UG thinks but 7 is lackluster and I know Pro/E can do 50-100 or more.
To do what you'd like you need to use the origin tool and choose associative and what side you want to place it on and do offset by coordinates or just create a blank note to attach the other leader.
Michael
And I don't care what UG thinks but 7 is lackluster and I know Pro/E can do 50-100 or more.
To do what you'd like you need to use the origin tool and choose associative and what side you want to place it on and do offset by coordinates or just create a blank note to attach the other leader.
Michael
- Status
