Another faulty installation 2

[trainguy]

Hi all.

After installing AutoCAD 2000i or 2000i LT on my home PC (Pentium2 466, Win98, 196 Mb RAM), I get the following message whenever opening up the application:

"This program has performed an illegal operation and will be shut down:

ACAD caused an invalid page fault in
module AC1ST15.DLL at 017f:65fe1e3b.
Registers:
EAX=00000000 CS=017f EIP=65fe1e3b EFLGS=00010246
EBX=bff77716 SS=0187 ESP=00daf888 EBP=00dafa54
ECX=00000000 DS=0187 ESI=00ed0400 FS=1b97
EDX=bff7024c ES=0187 EDI=00000001 GS=0000
Bytes at CS:EIP:
8b 10 8d 4e 04 8d 7e 14 89 11 8b 50 04 89 51 04
Stack dump:
00000001 00ed0510 00ed04f0 64616f4c 7262694c 41797261 bfbebd00 c3c2c1c0 c7c6c5c4 cbcac9c8 cfcecdcc d3d2d1d0 d7d6d5d4 dbdad9d8 dfdedddc c3c2c1c0 "


Help!

tg

 

[borgunit]

This may be the issue...

http://usa.autodesk.com/adsk/servlet/ps/item?siteID=123112&id=2893426&linkID=2475323

"Everybody is ignorant, only on different subjects." — Will Rogers

 

[trainguy]

Hi borgunit.

A measly star is not nearly enough to show my gratitude.
Thank you very much for resolving this. I've struggled with this for approx. 6 months!

I owe you one, that is, if you borg understand the concept of "one", versus the collective.

I'm starting to think you borg aren't all that bad...

tg

 

[borgunit]

Glad I could help. I always appreciate help and any tips I can find also.

"Everybody is ignorant, only on different subjects." — Will Rogers