Ansys and Rall comannd - memory statistics

[waxy]

pleas, can you explaine me more about memory statistics.
Where is here virtual memory. How much I need memory for solving this problem.

Thank you


*************** MEMORY STATISTICS ***************


***** SCRATCH MEMORY STATUS *****
Requested Initial Work Space = 144179200 Words 550.000 MB
Initial Work Space Obtained = 144179205 Words 550.000 MB

ANSYS Scratch Memory Size = 12058633 Words 46.000 MB
ANSYS Scratch Memory Used = 2823484 Words 10.771 MB
Available Scratch Memory = 9235149 Words 35.229 MB

Maximum Scratch Memory Used = 3343360 Words 12.754 MB
Largest Available Contiguous Block = 9235148 Words 35.229 MB

***** DATABASE STATUS *****
Current Database Position = 200251798 Words 763.900 MB
Maximum Database Length = 17179803643 Words 65535.750 MB
Memory Resident Database = 131072000 Words 500.000 MB
Void Space In Database = 5013737 Words 19.126 MB
*** PAGE FILE USED ***
Number of R/W Operations = 32789
Maximum Record Number = 11534
Record Size (I*4 Words) = 16384
Page File Size (MB) = 720.875

***** SOLUTION MEMORY *****
Binary I/O Page Size = 16384 Words 0.063 MB
Buffers Per Solution File = 4
Buffer Scratch Memory = 393216 Words 1.500 MB

Analysis Type = 0
Available Solution Memory = 8841933 Words 33.729 MB
Wavefront Available = 2760


***** SPARSE DIRECT SOLVER ESTIMATES *****
Number of Active Nodes = 1031479
Number of Equations = 2062958
Number of Terms in Equations = 60298740
SPARSE solver memory estimate = 1627.447 MB

Max. Solution Memory Space = 426625516 Words 1627.447 MB
In Memory Database Space = 132120572 Words 504.000 MB
Total Space Needed = 558746088 Words 2131.447 MB


***** FILE SIZE ESTIMATES *****

EMAT File Size = 0.000 MB
ESAV File Size = 1228.062 MB
FULL File Size = 790.000 MB
LNxx File Size
-Sparse Solver = 9676.688 MB

RMG Geometry Size = 645.062 MB
RMG Load Size = 1264.250 MB (max. per load set)

TOTAL = 13604.062 MB

Amount of available disk space on current filesystem/drive = 68.271 GB


DISPLAY ANSYS RUN TIME ESTIMATES


***** ANSYS SOLUTION PHASE RUN TIME ESTIMATOR *****

Computer = INTEL NT
Number of Master DOF = 0
Analysis Type = 0
Maximum Wavefront = 0
R.M.S. Wavefront = 0
No. of Active DOFS = 1031097
Stiff. Matrix Save Key = 1
Number of Matrices = 1
Elem. Matrix Save Key = 0
Est. No. of Iterations = 1

LABEL NUMBER FORM. TIME RESULTS TIME NAME
SOLID117 144963 0.004 0.004 3-D 20-NODE MAGNETIC SOLID
SOLID117 401953 0.004 0.004 3-D 20-NODE MAGNETIC SOLID
SOLID117 212421 0.004 0.004 3-D 20-NODE MAGNETIC SOLID


FIRST SUBSEQUENT
ANALYSIS PHASE ITERATION ITERATIONS

ELEMENT FORMULATION 2838.02 2838.02
ELEMENT PREPARATION 214.81 214.81
SPARSE DIRECT SOLUTION 0.00 0.02
ELEMENT RESULTS 3360.07 3360.07
NODAL LOAD CALCULATIONS 709.51 709.51

SUBTOTAL TIMES (SEC) 7122.41 7122.42