Ansys power graphic - drawing edge problem

[wwwJKPhu]

Hello,

if your Ansys draw edge where actually no edge, type the following:

/edge,all,0,0

http://files.engineering.com/getfil...f-ec23-4d1a-9658-f0be705ae27b&file=001001.jpg

http://files.engineering.com/getfil...7-8e8f-4cf9-8bf1-76451e76c848&file=001002.jpg

Regards,
JKP

Juhast Karoly Peter
structural engineer

http://www.jkp.hu