Any add-ins in Catia for Gear, sprocket, screws etc.

[aerosandy]

Hello Everyone,

I had a question whether Catia has any add-ins or macro's which will enable standard, gear, sprocket, screw, bolts, nuts,etc. designs. Like some of the standard components used in Mechanical design. If someone has used CADKEY, they might know of DRAFT-PAK. I' am checking for something similar to that package in Catia. I'am using Catia V5 R14.

Thanks in advance,

Sandy

 

[catiajim]

Design Tables and Catalogs should be able to fit what you are asking for. There are some standard components included with CATIA, but I have never found them to be of any use.

There are several 3rd parties that offer add in catalogs of standard hardware.

 

[AutumnEng]

Sandy
Yes, go to 'solid engineering solutions'website.

http://www.solengsol.com/index.shtml

 

[ferdo]

Hi,

Or see

http://www.traceparts.com/

Regards
Fernando