Any good books? 1

[jabonet]

I have some knowledge on AutoCAD 2002, as far as 3D stuff goes, but the change to using Microstation V8, is being a little too hard.
Is there any good books on Microstation, I prefer if the examples are engineering oriented, as some of the books out there are only for architects.

Thanks in advance.

 

[bundle]

Hi,
You can find all tutorials and other sources on Bentley's web. you may find there what you need. address is below...

http://docs.bentley.com/dl.asp

 

[rKeyTek]

http://www.people.virginia.edu/~arch-con/Help/ustation/ushelp.html

http://www.aecdesignware.com/

http://www.askinga.com/

http://www.axiomint.com/

http://www.bentley.com/

http://www.delcom.com/msdir/freesoft.html

http://www.cadchat.com/forums/

http://www.caddepot.com/

http://www.easint.com/

http://www.hlbtech.com/

http://www.intergraph.com/documents/alldept.htm

http://www.intergraph.com/

http://www.nws.usace.army.mil/cadd/mdl_ucm.htm

http://www.delcom.com/msdir

http://www.msmonline.com/

http://www.dot.state.ny.us/caddinfo/design/caddsettings/microstation/micros.html

http://www.tmc.org/

http://www.workplacewisdom.com/

These are some links I've collected ... related to MicroStation.

They ain't books, but I hope they help.
Rich

 

[namdac]

Try this one too!

http://www.wfl.fha.dot.gov/geopak/idiot2001/idiot2001.htm

Good Luck
Namdac