Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

API 6A - Table-11 - Steel composition limits

Status
Not open for further replies.

Rohithgowda

Materials
Jul 4, 2023
1
what exactly footnotes -a indicate , since carbon max. shown 0.45 % mass fraction for carbon however footnote-a shows 2 % mass fraction
which one is it refer max. in 0.45 or 2% mass fraction ?
 
Replies continue below

Recommended for you

The footnotes are intended to be informative definitions of carbon steel and low-alloy steel.

The 0.45% max shown in the table is the applicable limit for carbon and low-alloy steels.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor