API 6A WAFER CHECK VALVE MANUFACTURERS 4

[NAPB]

Team,

Does anyone know an API 6A Wafer Check Valve manufacturer?

Thanks in advance!!

 

[Kandeel76]

Hi,

You may check cameron , Kitz also bonney forge

http://www.c-a-m.com

http://www.valvekitz.com/index.pl?s...=&Pressure=&skcd=SK1503&skcd=&skcd=&x=13&y=11

http://www.bonneyforge.com

 

[gerhardl]

There are many suppliers, for instance:

http://www.gestra.com/products/a2_rkiht.php

(Flowserve, but the actual factory gives more detail)

NOTE! Always true for this forum: if you narrow the question you will get a faster and better response.

Allow me also to give on the advice an old and experienced engineer gave me many years ago. This has helped me a lot!

'First you try to find the solution yourself, at least twice. Then you start asking for advice by informing what you have found and where you are stuck!'

 

[NAPB]

Thank you very much Kandeel76 and gerhardl; however I'm looking for API 6A Class 10000 Swing Check Wafer Type.

 

[gerhardl]

Please give more data; flow, diameter, fluid and any additional operational requirements.

I am not sure I would have selected this type of checkvalve. Could give operational problems if not selected/dimensioned correct.

 

[gustorf]

Try Goodwin dual plate check valves or Noreva nozzle check valves.

http://www.checkvalves.co.uk

http://www.noreva.de

 

[gerhardl]

... nozzle check valve might be a good choice, ref. gustorfs post above! (other suppliers exiats, Noreva one of the tops.