apply Image on a model surface

[thecadman3]

Hi,

I have simple block models and would like to apply a single image (jpg or bmp) to a selected surface. Can I do this without Photoworks?

Thanks.

 

[AnnaWood]

Do a search on Decals in SW Help..... That is the operation you are looking for.

Cheers,

Anna Wood
Core i7 EE965, Nvidia Quadro 5000, 12 Gb RAM, OCZ Vertex 120 Gb SSD, Dell 3008WFP 30" Monitor
SW2011 SP0, Windows 7 x64

http://www.solidmuse.com

http://www.phxswug.com

 

[AnnaWood]

Sorry missed the Without PW..... Do not believe it is possible. Hopefully some one will prove me wrong.....

Anna Wood
Core i7 EE965, Nvidia Quadro 5000, 12 Gb RAM, OCZ Vertex 120 Gb SSD, Dell 3008WFP 30" Monitor
SW2011 SP0, Windows 7 x64

http://www.solidmuse.com

http://www.phxswug.com

 

[rstupplebeen]

If it is a flat surface a sketch picture may pull it off for you. Also, if you create a texture and a patch with the right aspect ratio it may work. I hope this helps.

Rob Stupplebeen

 

[thecadman3]

Thanks for the ideas. Using sketch picture means having show sketches in assembly which is no good..never mind Thanks

 

[rstupplebeen]

Create a sketch with only the sketch picture. Show sketches and hide all other sketches individually. I hope this helps.

Rob Stupplebeen