Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Arbitrary Beam Cross Section (ABCS)

Status
Not open for further replies.

gotm

Mechanical
Sep 2, 2022
4
0
0
IT

Please,

I found the ABCS method described for example in the MSC Nastran 2022.1

Linear Static Analysis User’s Guide Ch. 4 page 137 onw.

that is, after an arbitrary cross definition, the complete stress recovery

for the whole cross section, with torsion and shear effects included.

It seems that a FEM for each section is generated (GRID and CTRIA6),

Nastran run with .f06 and .op2 up to Von Mises section plots also.

Is there any link to Patran menu?

Anybody has an exercise step by step?

 
Replies continue below

Recommended for you

You might get a 'best-response' to this issue in the E-T NASTRAN forum...


Regards, Wil Taylor
o Trust - But Verify!
o We believe to be true what we prefer to be true. [Unknown]
o For those who believe, no proof is required; for those who cannot believe, no proof is possible. [variation,Stuart Chase]
o Unfortunately, in science what You 'believe' is irrelevant. ["Orion", Homebuiltairplanes.com forum]
 
Thanks for the reply and nice philosophic - eng - tips after your signature.
I'll check in that forum.
Regards.
 
Status
Not open for further replies.
Back
Top