Wednesday at 11:24 AM #1 K Kanu_01 Electrical Nov 27, 2024 9 I am trying to run arc flash analysis in SKM. My system is at 13.2 kV. Do I need to define voltage tolerances in EPRI method too if I am running my system at 13.2kV? What tolerance range is considered to calculate incident energy? Attachments IMG_0962.jpeg 5.1 MB · Views: 1
I am trying to run arc flash analysis in SKM. My system is at 13.2 kV. Do I need to define voltage tolerances in EPRI method too if I am running my system at 13.2kV? What tolerance range is considered to calculate incident energy?
