Archard wear simulation

[Iman@123]

I'm a master student, simulating wear in drill pipes, I'm asking if I can simulate wear without using any subroutines

 

[FEA way]

What software are you using ?

 

[IRstuff]

ARCHARD WEAR SIMULATION | Ansys Learning Forum

How to do Wear simulation?..I find out the model named Archard wear model by seeing some videos in youtube. my question is how to do download wear simulation extension model? tqn

innovationspace.ansys.com

 

[Iman@123]

What software are you using ?

abaqus

 

[Iman@123]

What software are you using ?

I have tried using ansys before, but I don't have a license foe ACT, is there anyway to simulate it in ansys without it

 

[FEA way]

abaqus

Since Abaqus 2024 HF1, contact wear based on Archard's equation can be modeled directly without subroutines.

 

[Iman@123]

Since Abaqus 2024 HF1, contact wear based on Archard's equation can be modeled directly without subroutines.

so because I'm using 2023 I will need to use subroutine

 

[FEA way]

I will need to use subroutine

Or a Python script. There is one available from the DS Knowledge Base article "Modeling Archards Wear in SIMULIA Abaqus" but it's most likely available only for users with customer accounts.

 

[Iman@123]

Python script

Sorry, but can you provide me with the link, I couldn't find it