Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Architectural Desktop Plotting linetypes

Status
Not open for further replies.

MOON

Civil/Environmental
Apr 6, 2001
3
Hello,
I've been trying to print a drawing on Architectural desktop in a top view, where I set up walls to have visible the line above the cut plan as hidden line, so when I have an opening into my walls instead of not having lines above they would appear as a hidden lines .
Although my screen shows me these lines above the walls as I want them to be, at the moment of printing all them appear continuous.
I decided to make a tryal, so I drew a line having the same linetype and scale as the wall's line above the cut plan ( in fact this line is in the same layer), and what I've got is that my single line is hidden (as it should be) but the lines above the walls are continuous, which means that this isn't a problem of a drawing scale.

I would apreciate if somebody can give me a hand with this or tips related to this matter.
Thanks a lot,


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor