Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in

ASHRAE 90.1 requiring min R-20 for roofs?

Status
Not open for further replies.
wds1

wds1

Structural
Mar 22, 2004
29
0
0
US
Is ASHRAE requiring a R-20(min. 3.3" polyiso) for roofs.? When will it be effective in the codes?
 
Status
Not open for further replies.

Similar threads

Ahmed Elarbagi
  • Locked
  • Question
Horizontal Direct Fired Heater Minimum Stack Height Requirements
Replies
0
Views
10
Ahmed Elarbagi
Ahmed Elarbagi
AliGrailly
  • Locked
  • Question
Min and Max Bend Radius 4
Replies
8
Views
14
Cobra17
Cobra17
ajw771983
  • Locked
  • Question
Seismic design forces for Non-structural components above grade
Replies
0
Views
6
ajw771983
ajw771983
nvcadadmin
  • Locked
  • Question
Single Source Options for Standards Organizations
Replies
0
Views
5
nvcadadmin
nvcadadmin
spray_arc
  • Locked
  • Question
Using UNS system to comply for American and EU Standards welding qualifications
Replies
0
Views
10
spray_arc
spray_arc
Back
Top