Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASHRAE 90.1 requiring min R-20 for roofs?

Status
Not open for further replies.
wds1

wds1

Structural
Mar 22, 2004
29
Is ASHRAE requiring a R-20(min. 3.3" polyiso) for roofs.? When will it be effective in the codes?
 
Status
Not open for further replies.

Similar threads

G
  • Question
What standard is used for high-temperature pressure vessels in Europe?
Replies
0
Views
316
GlassPowder
G
HungryDinosaur_imported
  • Locked
  • Question
Line colour code/standard for dimensions, text and equipment on .dwg drawings
Replies
3
Views
4K
BrianPetersen
BrianPetersen
Ahmed Elarbagi
  • Locked
  • Question
Horizontal Direct Fired Heater Minimum Stack Height Requirements
Replies
0
Views
611
Ahmed Elarbagi
Ahmed Elarbagi
AliGrailly
  • Locked
  • Question
Min and Max Bend Radius 4
Replies
8
Views
352
Cobra17
Cobra17
ajw771983
  • Locked
  • Question
Seismic design forces for Non-structural components above grade
Replies
0
Views
692
ajw771983
ajw771983

Part and Inventory Search

Sponsor

Back
Top Bottom