Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Asign Channel shape to a Beam Element

Status
Not open for further replies.

Ezequiel1982

New member
Joined
Jun 20, 2010
Messages
37
Location
ES
Hello To All,

Can anybody tell me how to asign a Channel shape to a beam element with abaqus ?. As far as I know in the property module there are the following shapes: L, I, T, BOX, RECT but not "C".

Thanks in advance!

Ezequiel
 
hi

with the version 6.10 or 6.11 of Abaqus you can asign a Channel shape to a beam element with Arbitrary option in the toolbox Create profiles

A +
 
Brian,
Yes it does have that option. You can specify I and Area for a "Generalized Profile." For his C profile, he can use "Arbitrary Profile" and define the curve and thickness.
 
Thanks for the answers!. I used "arbitrary profile"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top