giuss73
Industrial
- Jan 11, 2019
- 6
Gents
I deal with acceptance criteria related to machined flange class 150 (mat. ASME A 182 F44 4"/ANSI B16.5). Client rejects a tool marks running through circumferential of rim. By my experience this has only a visual impact (cosmetic imperfection ) no one functional aspect is compromised providing that it is less than 0.1 mm depth. Any advice ? Thanks in advance
I deal with acceptance criteria related to machined flange class 150 (mat. ASME A 182 F44 4"/ANSI B16.5). Client rejects a tool marks running through circumferential of rim. By my experience this has only a visual impact (cosmetic imperfection ) no one functional aspect is compromised providing that it is less than 0.1 mm depth. Any advice ? Thanks in advance
