Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASME SECT. III CL. I

Status
Not open for further replies.
czarthur

czarthur

Materials
Nov 19, 2008
3
One of my custom ask we to supply some forgings and they need an independent ultrasonic test report. They also offer a sample of the report. In the report it showed as "ACCEPT. ASME SECT. III CL. I". What is the meaning of these words?
Thanks in advance
 
Replies continue below

Recommended for you

Sort by date Sort by votes
The American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (B&PV) Section III, Nuclear Power Plant Components, Division 1, Subsection NC, Class 1 Components.

Regards, John
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

EMANUELE GUERRINI
  • Question
ASME I Boiler with 15 PSI Pressure - Can I Use an ASME IV Safety Valve?
Replies
2
Views
267
The Obturator
The Obturator
JohnWE
  • Question
Number of thermocouples during PWHT according to ASME section I and B31.1
Replies
2
Views
363
JohnWE
JohnWE
ethan18
  • Locked
  • Question
Qualification of welding material for ASME Section III NB
Replies
0
Views
92
ethan18
ethan18
Motivated Apprentice
  • Question
Diameter in ASME IX
Replies
2
Views
340
Motivated Apprentice
Motivated Apprentice
milosd
  • Question
ASME SB-564 Maximum section thickness for N06625
Replies
1
Views
1K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top Bottom