mariovalenti
Mechanical
- Apr 25, 2007
- 15
I'm expecting to receive the last revision of ASME XII module, but I can't wait for it because I need to know some datas to design a LPG CARGO TANK as soon as possible (to request the steel for shell and heads).
I'll appreciate if anybody tell me the next information of ASME XII 2007 to advance my pre-design:
- Pressure design (content: LPG)
- Minimun temperature for design
- Minimun average impact test values required (longitudinal and transversal). I'm thinking to use an ASME VIII UHT steel (SA 517) for shell.
I have ASME XII 2004, but it is not complete about cargo tank, so I need this information ASAP.
Thank in advance to whom help to me.
Mario Valenti (Argentina)
I'll appreciate if anybody tell me the next information of ASME XII 2007 to advance my pre-design:
- Pressure design (content: LPG)
- Minimun temperature for design
- Minimun average impact test values required (longitudinal and transversal). I'm thinking to use an ASME VIII UHT steel (SA 517) for shell.
I have ASME XII 2004, but it is not complete about cargo tank, so I need this information ASAP.
Thank in advance to whom help to me.
Mario Valenti (Argentina)