Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Assembly Contrains

Status
Not open for further replies.

Lars1978

Mechanical
Joined
Dec 30, 2015
Messages
327
Location
NL
Hi All,

Is it possible to move assembly contrains between assemblies?
Let's say i've got an assembly containing a plain washer and a hex bolt. The plain washer is contraint to a hole in some other part. The bolt is contraint only to the washer.

When I now move the washer and the bolt to an subassemly, all constrains are lost.

I can see that the constrains between the hole and washer are not possible to maintain. But I can't see why the constrains between the washer and the bolt shouldn't be kept.

Any suggestions?


Lars

Lars
NX12.0.2.9 native
Solid Edge ST10
Inventor
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top