SiW979
Mechanical
- Nov 16, 2007
- 804
I have a user who has an assembly drawing which when ever it is opened, it always shows out of date at the bottom screen and all the sheets and views have the out of date symbol next to them.
initally there were some components in the assembly which were out of date which we duly update to the master model/assembly so all the components were up to date, opend the drawings and updated all the views and saved the drawing.
However, even though when we open the assembly now it is fully up to date with no (!) at the top, whenever we open the drawing of the assembly, all views and sheets are still out of date. >:-<
Any ideas as to what the issue is would be most welcome. Many thanks.
Best regards
Simon NX4.0.4.2 MP10 - TCEng 9.1.3.6.c - (NX7.5 native)
Life shouldn't be measured by the number of breaths you take, but by the number of times when it's taken away...
initally there were some components in the assembly which were out of date which we duly update to the master model/assembly so all the components were up to date, opend the drawings and updated all the views and saved the drawing.
However, even though when we open the assembly now it is fully up to date with no (!) at the top, whenever we open the drawing of the assembly, all views and sheets are still out of date. >:-<
Any ideas as to what the issue is would be most welcome. Many thanks.
Best regards
Simon NX4.0.4.2 MP10 - TCEng 9.1.3.6.c - (NX7.5 native)
Life shouldn't be measured by the number of breaths you take, but by the number of times when it's taken away...
