jeff97070
Mechanical
- Feb 14, 2013
- 52
Hello,
I want to thank everyone with sharing all you knowledge with me. Here is my next question from the rookie.
I have a assembly drawing, a block with three dowel pins two of one size and one is a different size. The Dowel pins belong to a table with many different sizes or is this called a famiy table and I did not create this table.
When I load the model into the drawing and bring in the Bill of Materials it shows Item 1 the block, item 2 Dowel pin qty 2 and item 3 Dowel pin qty 1 the issue is that the Bill of Materials in the part number and discription areas is calling both Dowel pins the same thing. How do I get the Bill of Materials to show what each Dowel pin is supposed to be called. In the Table the Dowel pins come from they are named correctly like M2X12 and M4X12
Thank you,
Jeff
I want to thank everyone with sharing all you knowledge with me. Here is my next question from the rookie.
I have a assembly drawing, a block with three dowel pins two of one size and one is a different size. The Dowel pins belong to a table with many different sizes or is this called a famiy table and I did not create this table.
When I load the model into the drawing and bring in the Bill of Materials it shows Item 1 the block, item 2 Dowel pin qty 2 and item 3 Dowel pin qty 1 the issue is that the Bill of Materials in the part number and discription areas is calling both Dowel pins the same thing. How do I get the Bill of Materials to show what each Dowel pin is supposed to be called. In the Table the Dowel pins come from they are named correctly like M2X12 and M4X12
Thank you,
Jeff