Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Assembly scene with section view
- Thread starter lcatg
- Start date
One option is with FTA license.
Regards
Fernando
- Romania
- EU
Regards
Fernando
- Romania
- EU
@lcatg
1. In order to save section views in scenes you need an FTA license as ferdo mentioned.
2. A work around is to use a split to cut the parts needed to generate the drawing view. Then lock the drawing view and deactivate the split operation in the 3D.
Drew Mumaw
1. In order to save section views in scenes you need an FTA license as ferdo mentioned.
2. A work around is to use a split to cut the parts needed to generate the drawing view. Then lock the drawing view and deactivate the split operation in the 3D.
Drew Mumaw
- Status
Similar threads
- Locked
- Question