Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Associate two or more sketches

Status
Not open for further replies.

surinderbirdi

Automotive
Joined
Jun 14, 2016
Messages
31
Location
US
Hello Guys,

can two different sketches be associated/constrain with each other. So that if I move start point of a line in sketch(1), the sketch(2) also move along with the that point.

I am using NX9

Thanks in advance.
Surinder
 

Yes.

As an example on the xy plane create the first sketch and draw a circle and finish the first sketch.
next on the xy plane create the second sketch and draw a line now do a coincident constraint
between the end point of the line and the center point of the circle (use in work part only intent)
and finish the second sketch.

Now go to the first sketch and drag move the circle and the line will also move. (use update to see the moving)

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top