Nov 8, 2010 #1 TeejT Mechanical Jan 19, 2010 80 Does anyone have the ID tolerance spec on 1-1/4" SCH 40 pipe? Thanks!
Nov 8, 2010 Thread starter #3 TeejT Mechanical Jan 19, 2010 80 It falls under an ASTM standard and an ASME standard... Upvote 0 Downvote
Nov 10, 2010 #4 EdStainless Materials May 20, 2004 16,030 There is no ID tol. Only OD and wall tol. You can see the total combined, and on pipe that is a big number. The max wall on pipe is only limited by weight, so heavy pipe is a possibility. = = = = = = = = = = = = = = = = = = = = Plymouth Tube Upvote 0 Downvote
There is no ID tol. Only OD and wall tol. You can see the total combined, and on pipe that is a big number. The max wall on pipe is only limited by weight, so heavy pipe is a possibility. = = = = = = = = = = = = = = = = = = = = Plymouth Tube
