Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASTM A182 Heat lots hope this is correct forum
- Thread starter kpl012
- Start date
There are different ways to manufacture flanges for ASME B16.5. If you have a copy of ASME B16.5 you would know that flanges can be fabricated from several product forms - castings, plate and forgings. Take your pick. Please review the appropriate material specification and B16.5.
This is becoming pretty annoying now. It's probably the 4th topic you've started here within a week, for which you've made double/triple/quadruple every time.
Now again. Please be patient in receiving replies. People may not react within a day, it sometimes takes a little more time.
We also have other jobs to do.
Furthermore, if you feel your topic has received to little attention, you may bump it (but don't bump within a day or two!), rather then making a completely new topic (i.e. double post).
If you think it has been the wrong forum in which your original topic has been posted, then think twice next time before hitting the Submit Post button and feel confident you're in the right section.
Now again. Please be patient in receiving replies. People may not react within a day, it sometimes takes a little more time.
We also have other jobs to do.
Furthermore, if you feel your topic has received to little attention, you may bump it (but don't bump within a day or two!), rather then making a completely new topic (i.e. double post).
If you think it has been the wrong forum in which your original topic has been posted, then think twice next time before hitting the Submit Post button and feel confident you're in the right section.
- Status
Similar threads
