Braham0123
Mechanical
- Sep 8, 2020
- 4
Hello;
Please support by clarifying the following:
Table 2 and 3 establish the mechanical requirements, which must be met for each grade, however I do not see the maximum or minimum tolerable limits.
Or when carrying out a test, the values obtained must strictly comply with what is indicated in the tables according to the standard?
Thanks for the replies.
Greetings.
Please support by clarifying the following:
Table 2 and 3 establish the mechanical requirements, which must be met for each grade, however I do not see the maximum or minimum tolerable limits.
Or when carrying out a test, the values obtained must strictly comply with what is indicated in the tables according to the standard?
Thanks for the replies.
Greetings.